ClashWise

Clash matrix

Agree the rules once. Every clash arrives already triaged.

A clash matrix holds your coordination standard for each pair of element classes: priority, owner, due days, tolerance and which element gives way. Wise drafts it, your team agrees it, and ClashWise applies it to every clash you publish from Navisworks.

Open the free matrix builder
5,050
rules per matrix
7
decisions in every rule
1
edit updates every matching clash

Northbank · Level 026 classes · 5 disciplines

21 rules drafted · ready to review

Example matrix rules by priority
BeamsStructureColumnsStructureDuctsMechanicalPipesPlumbingCable traysElectricalSprinklersFire protection
Beams
Columns
Ducts
Pipes
Cable trays
Sprinklers

Wise · suggested

Ducts × Beams High

Gives way
Ducts

Rerouting the duct is cheaper than a beam penetration, which needs structural approval.

  • Critical
  • High
  • Moderate
  • Low
  • Informational
Illustrated example. Select a cell to read its rule.

One rule, every clash

Change a rule and every matching clash follows.

Edit the Ducts × Beams rule once. ClashWise analyses the clash sets that use the matrix again and updates each matched clash. Clashes your team edited by hand stay as they are.

  1. Edit the ruleRaise the priority and name an owner.
  2. Matched clashes updatePriority, owner and due date arrive on each one.
  3. Hand edits stayA clash set by hand keeps its value.

Contacts in your organisation get one notification when new clashes reach them. The clash inspector shows the matched rule and can restore its values in one step.

Ducts × BeamsMechanical × Structure · rule 4 of 21

Priority
ModerateHigh
Owner
UnassignedPriya Shah · MEP lead
Due days
—10 days

12 clashes in Ducts × Beams11 updated · 1 kept

Clashes matched to the Ducts × Beams rule
#ClashPriorityOwnerDue
#038Supply duct SA-204 crosses beam B2-14ModerateHigh—Priya Shah—Oct 31
#041Return duct RA-118 under beam B2-09ModerateHigh—Priya Shah—Oct 31
#042Supply duct SA-206 through beam B2-15ModerateHigh—Priya Shah—Oct 31
#047Exhaust duct EA-031 at beam B2-22ModerateHigh—Priya Shah—Nov 1
#051Riser duct SA-R2 clips transfer beam TB-02Set by hand · keptCriticalDan OkaforOct 25
#053Duct transition at beam B2-30ModerateHigh—Priya Shah—Nov 1
#057Supply duct SA-211 through beam B2-31ModerateHigh—Priya Shah—Nov 2
#063Return duct RA-120 flange at beam B2-07ModerateHigh—Priya Shah—Nov 2
#066Fresh air duct OA-004 at edge beam EB-3ModerateHigh—Priya Shah—Nov 2

Showing 9 of 12 · Level 02, service zone

Seven decisions in every rule.

A rule covers one pair of classes within their disciplines, such as Ducts × Beams. Wise can suggest every value, and your team decides what stays.

  1. Priority

    Your own priority levels and colours. Start from Critical to Informational, add levels and set their order.

  2. Starting status

    The status a matched clash starts in, chosen from your own list of statuses.

  3. Test type and tolerance

    Hard or clearance, with a tolerance in millimetres, centimetres, metres, inches or feet.

  4. Responsible contact

    The person or company that owns clashes for this pair.

  5. Due days

    The days allowed after a clash is first published. A date set by hand always wins.

  6. Gives way

    Which element should move: element A, element B, either, or neither for an intended overlap or opening.

  7. Tags and notes

    Tags for grouping and reporting, and notes the team can read beside the rule.

Switch a rule off to keep it in the matrix without applying it to clashes. Open a rule to read why Wise suggested its values.

Wise drafts every rule, and you decide what stays.

Drafting a matrix by hand means deciding hundreds of pairs. Wise gives you a complete starting point to review.

  • Wise fills in priority, starting status, tolerance and which element gives way for every pair, and can suggest tags.
  • Suggestions take your project type into account, from 22 types such as healthcare, education and data centres.
  • Open a rule to read the reasons, and mark a suggestion as helpful or not.
  • Re-evaluate with Wise fills empty values. Replacing values you have set is a separate choice for each field.
  • Prefer to set everything yourself? Start blank: every pair is created with nothing set and no AI is used.

Wise drafting is included with Pro and Business plans and their trials.

Rate a clash pair with the free tool

Try the matrix on an example federation.

Select Beams × Ducts below. Change the test type or tolerance to see the proposed Navisworks test update, then switch to Clashes to browse the published results.

The illustrative matrix has four search sets, seven rules and 42 published clashes. Three representative clashes include model detail, including #042 in Beams × Ducts.

In Clashes, blue shading shows clash count, not urgency. A zero means a defined pair has no clashes in the current view, a dash means there is no rule, and unmapped clashes have their own entry so they remain part of the review.

From whatever you have to tests in Navisworks.

You do not need Navisworks or a published clash set to build a matrix. When you are ready, the same rules prepare the Navisworks tests and receive the results.

  1. Start from what you have

    Type, paste or import a class list from CSV or Excel, tick common classes or ask Wise for typical ones. Or generate from a published clash set, a new federation in Navisworks, a company standard or the free matrix builder.

    • Class list
    • CSV or Excel
    • Wise suggestions
    • Published clash set
    • Company standard
    • Free builder
  2. Check that it fits the models

    See how many of a set's clashes would match a rule, and why the rest would not. Map model values such as Duct Fittings onto Ductwork, and model disciplines onto yours. Nothing changes until you save.

  3. Prepare the Navisworks tests

    Each active rule becomes a clash test with its own test type and tolerance. See which sets and tests will be created, updated or left ready. Conflicting user edits are preserved.

  4. Run, publish and review

    Run the tests in Navisworks and publish. Every clash arrives matched to its rule, with the recommendations filled in.

Coordination Setup requires an active or trial Pro or Business organisation subscription. Navisworks performs the geometric checks. Already have search sets? The batch test tool creates pairwise tests from selected sets and is included with Starter.

Explore Navisworks automation

Use the matrix wherever your team works.

The matrix stays current as the project changes. After republishing, preview new class pairs and add the ones you need. Normal updates keep existing rules and edits, while exact synchronisation and regeneration are separate actions with their own review.

  • In Navisworks

    Clash cards show the matched rule, values that were overridden and rules that changed since assignment.

  • Wise in Navisworks and Revit

    Ask Wise about the matrix or rate two selected elements against its rule. When Wise prepares a fix in Revit, it moves the element that gives way.

  • Excel round trips

    Export the rules workbook, edit supported fields and import the changes. Blank cells keep existing values.

  • AI clients through MCP

    Connect an AI client to read your matrices and preview rule edits before confirming them, with access your organisation controls.

  • The view that suits the task

    Go through rules as a list, by pair or with split columns, or as a grid by discipline or class.

  • Shared with the right people

    File a matrix in a project so its members can use and edit it. Business adds a company library of standards that every project can clone.

You can try the rating on a single pair for free: the clash priority tool rates two element types for priority, starting status and who gives way, on the web or from an AI client.

Open the clash priority tool

Which plans include the clash matrix.

No account needed

The free matrix builder and the clash priority tool.

Starter

Batch search sets and clash tests in Navisworks.

Pro and Business, including trials

The matrix workspace: building and editing matrices, Wise drafting, analysis of published clashes, the fit check, Excel round trips and Coordination Setup.

Business

A company library of standard matrices that every project can clone.

Compare plans and pricing

Questions about the clash matrix.

What you need to start, how it fits your models and what Wise changes.

Do I need Navisworks to build a matrix?

No. You can build and edit a matrix from a list of classes. To apply it to clashes, publish clash results from Navisworks with the ClashWise plugin.

Does ClashWise detect clashes?

No. Navisworks detects the clashes. ClashWise manages them after they are published: it applies the matrix, tracks the work and records decisions.

Can I bring an existing matrix?

Yes. Import its classes and disciplines from a CSV or Excel file, including a ClashWise rules workbook. Rule values can then be edited in the rules workbook and imported back.

What if the models name a class differently?

Run the fit check against a published clash set and map the model's names onto your matrix classes. The mapping is saved on the matrix, so every clash set that uses it benefits.

Will Wise overwrite values I have set?

Not unless you ask it to. Re-evaluate fills empty values by default, and replacing existing values is a separate choice for each field.

How large can a matrix be?

Up to 100 classes and 5,050 rules, which covers every pair of 100 classes, including each class with itself.

Build your first clash matrix.

Start a trial with your own class list or a published clash set, or sketch your discipline pairs with the free matrix builder first.

Follow the full coordination workflow